CALL 1-971-240-6004 for information(9AM -6PM )or to order by VISA/MC
if you need the 220 VAC model email us for shipping charges




 SLANTCABBER.jpg - 0 Bytes
The Slant Cabber is a unique angled flat lap machine that allows for easy viewing while you grind flats, re-work quartz crystals, or make millimeter and free-form cabochons. Our 4-step accessory kit makes it possible for you to grind, shape and polish gem material immediately. The 4-step finishing process developed by Hi-Tech Diamond makes easy work of finishing quartz, agate, jasper, tourmaline, corundum, and opal, plus a wide variety of gem material both natural and synthetic. SLANT CABER IS QUIET Use the machine in the house or in recreational vehicles. No complaints. Our specially designed water spray shield keeps water in the work area and not on you. The Hi-Tech Diamond finishing process uses a modest supply of water - in most cases, a quart of water will last all evening. Clean up is easy and the polyethylene housing will last a lifetime.
Each machine includes:
  • Variable speed ball bearing DC Motor that runs on converted 115 VAC ( if you need the 2201 VAC model email us for shipping charges) and coolant reservoir w/splash shield
  • 180 Mesh Metal Bond Diamond Disc
  • 325 Mesh Diamond Smoothing Disc
  • 600 Mesh Diamond Smoothing Disc
  • 1200 Mesh Diamond Smoothing Disc
  • Tech-10 Polish Pad w/14,000 Mesh Diamond Compound
  • Disc Backing plates (4)
  • Complete instructions
  • 6 " model $499.50 plus
    $18.00 (48 USA states only)

    8 " model $599.95 plus
    $18.00 (48 USA states only)

    DSC01905a.jpg - 0 Bytes DSC02311a.jpg - 0 Bytes

    We have taken the basic Ameritool motor and combined it with our accessories. We give you hard steel diamond laps rather than the peel and stick normally supplied by Ameritool.

    For this reason please contact Sawthatrock with any questions about the equipment.
    The ameritool basic Plus.
    * (1) master lap for steel disc and felt disc * (1) 180 grit flat lap * (1) 360 grit flat lap * (1) 600 grit flat lap * (1) 1200 grit flat lap * * (1) felt disc * (1) leather disc mounted on backing plate * syringe of 14000 grit diamond paste * cerium oxide
    6 " model $569.00 plus
    $15.00 (48 USA states only)

    8 " model $669.00 plus
    $18.00 (48 USA states only)

     alluneed1.jpg - 0 Bytes alluneed2.jpg - 0 Bytes
    .All-U-Need is a horizontal lap machine available in 6" and 8" diameter size. You can grind flats, re-work quartz crystals, or make millimeter and free-form cabochons. Our 4-step accessory kit makes it possible for you to grind, shape and polish gem material immediately. The 4-step process makes easy work of finishing quartz, agate, jasper, tourmaline, corundum, and opal, plus a wide variety of gem material both natural and synthetic. The machine is quiet and can be used in the house or in recreational vehicles. Say good-bye to plastic aprons and cold, water-soaked hands. Our specially designed water spray shield keeps water in the work area and not on you. The Hi-Tech Diamond finishing process uses a modest supply of water - in most cases, a quart of water will last all evening. Clean up is easy. Just remove the water spray shield and tray, wash, and you are ready to work again.
    Each machine includes:
  • Variable speed ball bearing DC Motor that runs on 115 VAC (If you need the 220 VAC model email us for shipping charges) and coolant reservoir w/splash shield
  • 180 Mesh Metal Bond Diamond Disc
  • 325 Mesh Diamond Smoothing Disc
  • 600 Mesh Diamond Smoothing Disc
  • 1200 Mesh Diamond Smoothing Disc
  • Tech-10 Polish Pad w/14,000 Mesh Diamond Compound
  • Disc Backing plates (4)
  • Complete instructions
  • 6 " model $489.50 plus
    $18.00 (48 USA states only. All others email us for proper shipping charges)

    8 " model $589.95 plus
    $18.00 (48 USA states only. All others email us for proper shipping charges)

     4trim1.jpg - 0 Bytes 4trim2.jpg - 0 Bytes
    The 4/5" Trim Saw is the perfect machine for trimming out cabochon pre-forms and valuable faceting material. It can be used with either a 4" or 5" diameter saw. The large 9" x 6 1/4" table has no inhibiting lip, making it easy to trim oversized slabs. The blade cover can be raised if necessary to accommodate larger pieces. the front splash guard is removable. The saw housing is made from unbreakable cross-linked polyethylene and the housing is guaranteed for life. The 1/4 HP variable speed direct drive motor is fast enough to use ultra thin diamond blades and powerful enough for sintered diamond blades. The removable table top makes clean up quick and easy. Made in the U.S.A.
    4 " model $361.00 plus
    $12.00 (48 USA states only)

    5 " model $365.00 plus
    $12.00 (48 USA states only)

     6trim1.jpg - 0 Bytes 6trim2.jpg - 0 Bytes 6trim3.jpg - 0 Bytes 6trim4.jpg - 0 Bytes
    Our American made 6" Trim Saw is ideal for trimming facet material, opals and rock slabs of all types. The saw table has a large working area measuring 15" x 9". The durable housing is made of unbreakable cross-linked polyethylene which cannot rust. The housing and all plastic parts are guaranteed for life. This unit is equipped with a heavy duty direct drive permanent magnet 1/4 Hp motor with sealed ball bearing. The RPM ranges from 800 to 3400. Made in the U.S.A.
    6 " model w/blade $439.00 plus
    $18.00 (48 USA states only)

    6 " model w/blade and vice $539.00 plus
    $18.00 (48 USA states only)